Civil Requirements For ASRS Installation Requirements For High Rack

- May 29, 2020-

Civil Requirements for ASRS Installation

Generally, ASRS has higher requirements for civil engineering. Taking the steel structure warehouse as an example, this paper summarizes as follows: in the ASRS operation area, 350-500 mm space is required from the bottom of the steel structure beam to the top of the rack; the outer edge of the rack and storage equipment is 350-500 mm from the inner wall surface; and the ground level of the ASRS storage equipment layout area is less than (+10 mm).

The warehouse ground must be able to bear the dynamic and static pressure in the equipment area, and has higher requirements for the depth of the foundation and reinforcement. The reference data are as follows: the uneven settlement of the ground of the rack foundation is less than 1/1000; the distance from the ground to the reinforcement bar should be required according to the installation conditions, and the recommended distance should not be less than 150 mm; and the concrete grade should be no less than C30.

Installation requirements for high rack

Aiming at the situation that most ASRS high steel structure racks adopt combined racks, there are two main ways to install racks: anchors (chemical bolts) and adjusting steel brackets (footplates). The latter one needs the civil construction side carries out pre-embedded parts construction and secondary irrigation after installation.

Before rack installation, the basic condition, embedded parts or boreholes should be inspected, and the whole rack installation can only be carried out after the inspection is qualified. For example, the elevation dimension of the footplate should be strictly measured before installation. The upper surface of the entirefootplate should be located at the same datum level, and the height deviation should not be greater than (+1 mm).

Welfor is specialized in producing various pallet rack, cantilever rack, medium duty rack, mezzanine and platform, slotted angle shelving, push back rack, longspanrack, rivet rack, drive in rack, carton flow rack, stacking rack and other related storage equipment.

Welfor strictly implements ISO9001, FEM10.2.02, SEMA, AS4084 and RMI standard in all operations. Welfor offers a wide range of products to meet all of your order fulfillment & material handling needs: pallet rack and cantilever rack. Whether you are looking to populate an entire warehouse or you are in need of a single piece of equipment, Welfor has a solution for you.